Blow molding blow molding machine is an important equipment in the plastic processing industry. In order to ensure its safe and efficient operation, operators need to follow the following ten precautions:
Professional operation: Before starting the machine, ensure that it is operated by specially trained personnel. Informal operators are not allowed to work to prevent accidents.
Reduce no-load operation: Try to avoid no-load operation of the machine, which can effectively extend the service life of the equipment.
Circuit safety check: Select a suitable main power cord to connect the equipment. After the equipment is installed, be sure to check and tighten the screws of the electrical components to ensure safe grounding. During the operation of the equipment, the temperature and looseness of the electrical components should be monitored at all times, and abnormalities should be repaired or replaced in time.
Safe operating environment: Do not operate the equipment while drinking or fatigued to avoid injury or misoperation.
Be familiar with the operation interface: Before operation, please be familiar with the functions of each button and touch screen on the device, and understand the settings and definitions of all parameters. Keep in a safe position during operation to prevent accidents.
Monitor temperature control and current: Regularly observe the heating ammeter to ensure that the temperature controller is working properly to prevent low temperature. At the same time, pay attention to the current and heating of each motor, and keep the motor bearings in good condition.
Regular cleaning: Regularly clean the dust and debris on the electrical control cabinet and motor, maintain good ventilation, ensure heat dissipation, and avoid overheating of electrical components and motors.
Lubrication maintenance: During the production process, each lubrication part must be kept in good lubrication condition. Lubricating oil should be added at least once per shift to ensure that the machine is clean, free of oil stains and rust.
Anti-rust measures: If the machine does not work for a long time, be sure to carry out anti-rust treatment to prevent the equipment from rusting.
V-belt inspection: Frequently check the tightness of the V-belt and adjust it in time to ensure the normal operation of the machine.
Following the above precautions can effectively improve the safety and operating efficiency of the hollow molding blow molding machine and ensure the smooth progress of the production process.